RECOVIB FEEL – Wireless Accelerometer for Vibration Analysis
RECOVIB Feel has been designed for performing an immediate vibratory analysis. It is connected to an Android device or tablet PC via a USB connection. The supplied application enables the streaming of real-time vibration data on a chart in the time domain and in the frequency domain.
Once the data has been extracted, you can replay it in a data viewer, on your smartphone or your PC. The viewer allows for a detailed analysis of the vibrations recorded in the time domain and in the frequency domain.
Various signal processing options are available: high-pass, low-pass and band-pass filters, integrator filters (velocity mode) and dual-integrator filters (displacement mode).
In the frequency domain, there are a number of possible FFT-based computations: Amplitude Spectrum Peak and RMS, Power Spectrum, Power Spectral Density and Amplitude Spectral Density.
- « Quick & dirty » vibration monitoring
- Real-time vibration analysis
- Real-Time frequency and time analysis
- Vibration diagnosis
- Machine tools – Automotive – Aviation
- Structural analysis & Health monitoring
RECOVIB SUITE SOFTWARE
SIGNAL PROCESSING BLOCK DIAGRAM
The RECOVIB.Tiny is connected to a PC via a USB connection. The supplied software allows for time synchronisation with the PC, selection of the measuring range, as well as programming of the measurement interval.
When the sensor is disconnected from the PC and when the preset measurement start time is reached, the RECOVIB.Tiny begins to autonomously measure and store vibration values.
Once the preset stop time is reached, the RECOVIB.Tiny goes into sleep mode until it is reconnected to the PC.
The RECOVIB.Tiny is therefore recognised by the PC as an external storage device. Thanks to the supplied software, the measurements of one or more sensors stored in a compact binary format can be converted to standard formats depending on user preference (text, csv, MATLAB™ , LabVIEW™ formats).